TL;DR
Get home appliances delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Hunker reports that Malco’s TurboShear TS1, a $69.98 drill attachment designed for metal, can also cut vinyl siding and may handle curves more easily than a utility knife. The report says it is not suited to thicker vinyl flooring and can struggle with ribbed panels; performance and value depend on the material and job.
Hunker has reported that Malco’s TurboShear TS1, a drill attachment sold for about $69.98, can also cut vinyl siding, giving DIYers another option for curves and other cuts that can be awkward with a utility knife. The attachment is designed for metal, and its suitability depends on the vinyl’s thickness and shape.
The TS1 attaches to a drill or impact driver and is marketed for cutting materials including sheet metal, metal panels, vinyl siding and ductwork. Hunker says its metal-cutting design carries over to vinyl siding, which is generally easier to cut than metal. The report says the tool can make curved cuts and can begin a cut in a hole as small as one-half inch.
Hunker cites a Home Depot listing that showed the TurboShear at $69.98 and rated it 4.1 stars from 185 reviews, with 81% of purchasers recommending it. Those figures describe the retailer listing at the time of the report, not a controlled test of vinyl-cutting performance. Hunker notes that only one reviewer specifically mentioned using it on vinyl, and that reviewer gave it five stars.
The report says the TS1 weighs 1.75 pounds and measures 8.5 by 8.75 by 7.5 inches. It also says the jaws wear over time, particularly when cutting metal, and that replacement blades are available. Hunker cautions that the tool may have trouble with ribbed or corrugated siding; adjusting the jaws wider may help with those profiles, but the setting should be returned for long cuts in flat material.
A Faster Option for Siding Cuts
For a homeowner cutting vinyl siding, the attachment could reduce the effort involved in making shapes that are difficult to produce with a knife. Hunker says a utility knife works well for straight cuts guided by a straight edge, but can be slower and less effective on curves. The report also warns that the blade can be pulled off course by the siding’s textured surface and that knife use carries a risk of cuts to the hand.
The practical benefit is not universal. The TS1 is a drill-powered accessory rather than a standalone shear, and the user must already have a compatible drill or impact driver. Hunker says both hands are needed to operate it unless an optional drill clamp is used. The tool’s cost may make sense for a siding project involving many cuts, but may be harder to justify for occasional use.
Choosing the right cutter also affects the finished result and the work’s pace. A power shear can help with curves and repeated cuts, while a knife and straightedge may remain adequate for simple, straight cuts. Readers should match the tool to the siding profile and follow the manufacturer’s instructions rather than assuming a metal-cutting attachment handles every vinyl product.
Products Worth Considering
Samsung QN65LS03FAFXZA 65 The Frame QLED 4K Art Mode Vision AI Smart TV (2025)
Samsung 65 The Frame QLED 4K TV (2026) QN65LS03HEFXZA Bundle
Ring Alarm 5-Piece Wireless Security System
As an affiliate, we earn on qualifying purchases.
Where the TurboShear Has Limits
Vinyl siding and vinyl plank flooring are not interchangeable cutting jobs. Hunker says siding typically ranges from 0.035 to 0.055 inches or more, while even thin luxury vinyl plank flooring is about 0.079 inches thick. The report says that thickness is beyond the TS1’s specifications, so it should not be treated as a suitable cutter for vinyl plank flooring.
The report also distinguishes the TS1 from Malco’s TSV1 Vinyl Siding Shears, a separate attachment designed specifically for siding. Hunker describes the TSV1 as having a longer cut and wider jaw opening to accommodate thicker material, corrugations and folded nailing-flange edges. It cites a price range of $210 to $267 and says the tool includes a telescoping drill clamp. Those features come at a much higher cost than the TS1.
Other drill attachments are also available. Hunker describes a DeWalt option as slightly cheaper than the TS1 and having slightly lower ratings, and identifies lower-priced Skyshalo and Vevor attachments with few reviews. The report says the latter two have swiveling heads and include clamps. It also notes that dedicated power shears vary widely in price, so buyers may want to compare attachments with standalone tools before purchasing.
“The TurboShear is suitable for most vinyl siding cuts, but won’t perform properly on thicker materials, like cutting vinyl plank flooring.”
— Hunker
Performance Depends on Siding Profile
The available information does not establish how the TS1 performs across every vinyl siding brand, profile or job condition. Hunker cites just one Home Depot reviewer who specifically discussed cutting vinyl, so the retailer’s overall 4.1-star rating should not be read as a broad measure of vinyl-cutting results. The report says ribbed or corrugated panels may pose a problem, but does not provide controlled test results or quantify how often that occurs.
Prices and ratings can change, and the report does not establish current availability at every retailer. It also does not provide a head-to-head test comparing the TS1 with a utility knife, other drill attachments or dedicated power shears. Buyers should check the current price, compatibility and manufacturer specifications for their specific tool and material.
Check Fit Before Buying
Anyone considering the TS1 should first confirm that the planned material is vinyl siding within the attachment’s specifications, rather than thicker flooring or a profile the jaws cannot accommodate. Check the current instructions for the drill or impact driver, the attachment’s jaw adjustment and whether a clamp is needed for the intended work. For a project with corrugated panels, compare the TS1’s limits with a siding-specific shear such as Malco’s TSV1.
Hunker’s report does not announce a product launch or a change to the tools; it evaluates an existing attachment as a possible DIY alternative. The next step for readers is to compare current product specifications, pricing and return policies against the number and type of cuts their project requires. The best choice remains dependent on the siding profile, the available drill and whether the job calls for straight cuts, curves or repeated cuts.
Key Questions
Can the Malco TurboShear TS1 cut vinyl siding?
Hunker reports that the TS1 can cut vinyl siding, although it is designed for metal. The report says performance may vary with the siding profile, particularly on ribbed or corrugated panels.
Is the TS1 suitable for vinyl plank flooring?
Hunker says no. It reports that even thin luxury vinyl plank flooring is about 0.079 inches thick, beyond the TS1’s stated specifications.
What can the attachment do that a utility knife may not?
Hunker says the drill attachment can make curved cuts and may be faster than a utility knife. A knife can work well for straight cuts against a guide, but the report says it may be harder to control on curves or textured siding.
How much does the TurboShear TS1 cost?
Hunker cited a price of $69.98 at Home Depot when it published its report. Prices and availability may change, so check the retailer for current details.
Does the TS1 cut in both directions?
Hunker says the TS1 cuts straight and to the left. It says users can flip the workpiece when needed to make a cut from the other direction.
Source: hunker.com
