TL;DR
Get home appliances delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Pro Tool Reviews has detailed the features and specifications of Hilti’s DD 110-U-22 cordless core drill, a Nuron B-22 battery-powered tool for wet or dry coring. The report lists a $2,349 bare-tool price and highlights features including Active Torque Control, Rebar Boost and a tool-free collet; job-specific performance and operating costs are not established in the supplied material.
Pro Tool Reviews has published a report on Hilti’s DD 110-U-22, a cordless core drill designed for wet and dry coring in concrete and masonry. The report lists the bare tool at $2,349 and describes electronic drilling assistance, a tool-free barrel connection and a torque-control safety feature, giving contractors practical details to weigh against the tool’s cost and their work requirements.
The drill runs on Hilti’s Nuron B-22 battery platform and accepts core bits across a stated range of 15/32 to 5 3/16 inches. The source report also lists 24 electronic gears, 1,650 watts of rated input power, a bare-tool weight of 16.3 pounds and a working weight of 42 pounds. It names the DD-ST 22 as a compatible drilling stand. These are the specifications reported in the supplied material; it does not provide a test protocol or independent performance measurements.
Hilti’s setup supports wet and dry coring. For wet work, a quick-connect fitting on the side grip sends water into the core barrel, and a viewing window lets the operator check water flow. The report says a separate water-delivery system can be used and that Hilti recommends its DD-WMS Water Management System. For dry coring, the same grip can connect to a dust extractor to control dust.
The report describes several electronic features intended to help manage drilling. The Intelligent Coring Guide tracks drilling progress and pressure applied to the barrel, while the Electronic Starting Aid begins at a reduced power level—reported as 10%—before ramping up. Rebar Boost supplies additional torque when the bit meets reinforcing steel during stand-guided operation. The article says operators can switch the boost off after passing the rebar to limit battery use and bit wear, but provides no measured savings or comparative results.
Other details address setup, extraction and safety. The tool-free collet is intended to make compatible core-barrel changes easier, while Assisted Core Extraction uses oscillation to help loosen a stuck core. Hilti’s Active Torque Control, or ATC, is described as stopping barrel rotation if the tool detects a bind-up, reducing the risk of injury. The report does not quantify how often the system activates or establish that it removes the risks associated with coring.
For compatible bits, the report points to Hilti’s SPX-A Speed core bits, which the manufacturer recommends for concrete and brick. It says the bits are designed for handheld and rig-based work, with an emphasis on drilling speed and battery efficiency. The DD 110-U-22 is listed at $2,349 as a bare tool, or $71.50 per month through Hilti’s Fleet Pricing program. The supplied material does not specify what a fleet payment includes or whether battery, charger or other accessories are part of any package.
Cost and Features for Coring Crews
The report’s details matter most to contractors who regularly core concrete or masonry and need to compare a dedicated tool with their current equipment. At a listed $2,349 bare-tool price, the purchase decision may depend on how often crews drill, the range of hole sizes they need and whether features such as water delivery, dust extraction and assisted core removal fit their workflow. The monthly Fleet Pricing figure offers another listed payment route, but the source does not provide enough terms to compare its total cost with an outright purchase.
Features such as ATC and the Coring Guide are relevant because core drilling involves managing pressure, bit wear and sudden binding. Hilti’s stated functions are designed to assist with those tasks; they should not be treated as a substitute for training, appropriate protective equipment or safe operating procedures. For occasional small holes, the tool’s specialized functions and cost may be harder to justify. The source itself frames the purchase as more relevant to professionals who core regularly, rather than establishing that it is the right choice for every contractor.
Hilti DD 110-U-22 cordless core drill
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
How the Drill Handles Core Work
The product report focuses on how the DD 110-U-22 addresses recurring steps in coring: starting a hole, keeping the cut progressing, managing water or dust, changing barrels and removing the concrete core. Its 24 electronic gears and compatibility with the DD-ST 22 stand are part of the specifications supplied, while the described guidance and boost functions target pressure control and encounters with rebar.
Hilti’s recommendation of SPX-A Speed bits gives buyers a manufacturer-named pairing for concrete and brick, but the report does not compare those bits with other options. The figures also distinguish between the 16.3-pound bare-tool weight and 42-pound working weight, underscoring that the tool’s weight depends on its working configuration. The source does not list the contents of that configuration or the battery’s capacity.
“The system “actively tracks coring progress and the amount of pressure being applied to the core barrel.””
— Pro Tool Reviews, describing Hilti’s Intelligent Coring Guide
wet and dry concrete core drill bits
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Performance and Purchase Terms
The supplied report does not give a publication date, hands-on test results, measured drilling speeds, battery runtime or a comparison with competing drills. It also does not clarify whether the $71.50 monthly Fleet Pricing figure includes service, replacement tools, batteries or other costs. Buyers would need to check current pricing and program terms with Hilti, as well as confirm which accessories are included with the bare tool.
Some specifications warrant checking against the current product listing before purchase. The report gives a core-bit range of 15/32 to 5 3/16 inches, while the original supplied overview also refers elsewhere to a range of 5/16 to 5 1/4 inches. Because those figures differ, the supported operating range should be confirmed with Hilti. The material also does not quantify the performance or safety benefit of the electronic features, nor does it say which applications require a stand or a particular water-management setup.
Hilti core drill water management system
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Check Fit Before Buying
The next step for interested contractors is to compare the tool’s current specifications and price with the planned work: hole diameters, expected drilling frequency, wet or dry requirements, battery availability and whether the DD-ST 22 stand is suitable. Buyers should ask Hilti to confirm the bit range, package contents and Fleet Pricing terms before ordering, particularly because the supplied report contains conflicting range figures.
For crews considering the drill, a demonstration or job-specific trial could help determine whether the starting aid, coring guidance, rebar boost and extraction function suit their work. The source material does not announce a launch date, update, test schedule or further product milestone, so there is no additional development to report at this stage.
rebar boost cordless core drill accessories
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Key Questions
What is the Hilti DD 110-U-22?
It is a cordless core drill powered by Hilti’s Nuron B-22 battery platform and designed for wet and dry coring in concrete and masonry, according to Pro Tool Reviews.
How much does the DD 110-U-22 cost?
The report lists a $2,349 bare-tool price and a Fleet Pricing figure of $71.50 per month. It does not explain the monthly plan’s terms or what it includes, so buyers should confirm those details with Hilti.
Can the drill be used for both wet and dry coring?
Yes. The report describes a side-grip fitting for feeding water to the barrel during wet coring and a connection for a dust extractor during dry work. Hilti recommends its DD-WMS Water Management System for wet applications, according to the article.
What safety and drilling-assistance features does it have?
The report lists Active Torque Control, which is described as stopping barrel rotation when a bind-up is detected, along with an Intelligent Coring Guide and an Electronic Starting Aid. These features are not a substitute for safe operating procedures and appropriate training.
What core-bit sizes does it accept?
The report’s specification list gives a range of 15/32 to 5 3/16 inches, but another passage in the supplied material states 5/16 to 5 1/4 inches. Confirm the current compatible range with Hilti before buying bits.
Source: rss
Fall Picks
fall essentials
As an affiliate, we earn on qualifying purchases.
