TL;DR
Get home appliances delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
A Hunker report describes a DIY bedside tray made by attaching two metal cabinet pulls to a large tile, based on a project by DIYer Christina Dennis. The source estimates the supplies at about $20 and says tile size, adhesive curing, and rough edges are practical considerations; it does not provide independent testing of the finished tray.
A Hunker report describes a bedside tray made from a large tile and two metal cabinet pulls, adapting a project by DIYer Christina Dennis. The idea offers a use for leftover tile and a way to gather small items on a nightstand, though the source does not report testing the tray’s durability or its effect on sleep.
Dennis’s project attaches one drawer pull to each of two opposite sides of a large hexagonal tile using E6000 adhesive, according to Hunker. The pulls act as handles. The report says other tile shapes can work, provided the tile is large enough to hold commonly used bedside items such as a phone or eye mask.
Hunker estimates that the project’s supplies would cost around $20. Its examples include a small tube of E6000 Clear Adhesive priced at $4.48 and cabinet pulls starting at about $5 each; a tile may cost less than $4, depending on material and retailer. These are prices cited in the report, not guaranteed current prices, and the total can vary with the tile and hardware selected.
The report advises measuring the tile’s sides before buying pulls, which should be slightly shorter than the edges where they will be installed. It also describes a different option: adding pulls along every side to create a border, at a higher cost. The source does not specify the adhesive’s required curing time or give load limits for the finished tray.
A Small Use for Spare Tile
The project can give a leftover tile a practical second use instead of leaving it unused or sending it to waste. A tray also creates a defined place for items that otherwise spread across a small nightstand, and its limited surface area may prompt users to keep only a few items there. That organizational benefit is a practical interpretation of the design, not a measured result from the report.
Hunker cites research published in the journal Sleep concerning clutter and rest, but the supplied article does not provide the study’s specific findings or establish that this particular tray improves sleep. Readers should treat the sleep connection as background rather than a demonstrated benefit of the craft. The clearest value is the project’s low-cost reuse of materials and its potential to keep bedside essentials together.
large decorative tile for DIY tray
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
How the Tile Tray Is Assembled
The project combines a tile with hardware commonly used on cabinets. Hunker says porcelain or marble floor tiles are among the possible choices and points to large hexagonal tiles as an option that can provide a usable surface without taking up an entire bedside table. The key selection issue is not shape alone: the tile must be large enough for the items it is intended to hold.
For assembly, the report says to apply a bead of E6000 to each side of a pull, press it into place, and allow the adhesive to bond. It describes the adhesive as suitable for bonding metal to glass, ceramic or porcelain in simple craft projects. The source does not give a step-by-step curing schedule, so users should follow the product label’s instructions before putting items on the tray.
Tile edges may need attention. Hunker suggests smoothing rough ceramic edges with 60- or 80-grit sandpaper, then moving to 200- or 400-grit for a smoother finish. It also recommends considering self-adhesive felt pads underneath to help protect the nightstand. Sanding can create sharp fragments and dust, so wear eye protection and a suitable dust mask, keep the work area controlled, and follow the tile and tool manufacturers’ safety guidance.
““The remaining supplies will bring the total cost of this project to around $20.””
— Hunker, describing the project
As an affiliate, we earn on qualifying purchases.
Durability and Costs Vary
The source does not give load testing, durability results, or details about how the tray performs after regular use. It also does not state how long the adhesive must cure, whether the bond suits every tile-and-pull combination, or whether the finished tray is safe to carry while loaded. Users should follow the adhesive label and avoid relying on the tray to support heavy or fragile items until the bond is fully cured and checked.
The approximately $20 estimate is tied to example prices in Hunker’s report, and current prices may differ. The source also does not identify the publication date of the report or provide a direct account from Dennis beyond describing her project. Its reference to sleep research is not accompanied by study details sufficient to establish a specific health effect from using a tray.
As an affiliate, we earn on qualifying purchases.
Measure Before Buying Hardware
Anyone trying the idea can first measure the available nightstand space and list the items the tray should hold. Then measure the tile’s sides and choose pulls that fit without extending beyond them. Before attaching hardware, check the tile for cracks and rough edges; sand only where appropriate, using eye protection and dust protection.
After applying adhesive, follow the manufacturer’s directions for curing and ventilation, and test the handles gently before placing the tray in regular use. Add felt pads underneath if needed to protect the furniture. Hunker’s report describes a DIY option rather than a product launch or independently verified result, so there is no announced follow-up; cost, finish and performance will depend on the materials and workmanship.
As an affiliate, we earn on qualifying purchases.
Key Questions
What materials does the bedside tray use?
The Hunker-described project uses a large tile, two cabinet pulls and E6000 adhesive. Felt pads are optional for the underside.
How much does the project cost?
Hunker estimates the supplies at about $20, citing example prices for adhesive, pulls and tile. Prices vary by retailer, material and date.
Can a tile of any shape be used?
The report says different shapes can work, but the tile needs enough surface area for the items it will hold. Measure the tile’s sides and choose pulls slightly shorter than the relevant edges.
How can the tray avoid scratching furniture?
Hunker suggests smoothing rough tile edges where suitable and adding self-adhesive felt pads underneath. Use eye and dust protection when sanding, and follow the tile and tool safety instructions.
Is the finished tray tested to hold a particular weight?
The supplied report gives no load limit or independent durability testing. Follow the adhesive manufacturer’s curing instructions and check the bond before using the tray.
Source: rss
Fall yard work Picks
leaf blowers
As an affiliate, we earn on qualifying purchases.
